This product can only be shipped to the countries as listed below and is subject to the following shipping fees
Belgium, Netherlands, Luxembourg
€35
Rest of Europe
€50
For all other countries please contact us for a quote. Full details can be found here
Bright Green
Red
Marine Blue
4m
5m
6m
7m
8m
9m
10m
11m
12m
PRODUCT INFORMATION
PRODUCT INFORMATION
Any wave, anywhere
The Reo V7 features an evolved combination of design features that will help your wave riding improve. Maintaining its low aspect three-strut platform, the V7 offers super fast turning response with rapid but silky smooth movement through the window and a handling sweet spot that’s now even wider in its wind range.
The cleaner and tighter aerofoil has also improved the low end, which is now markedly better in the V7. Luffing later, you’ll enjoy even more predictability and clean feedback from the kite across a wider range of winds before the canopy is compromised.Of course, superb drift and float overhead remain key characteristics that have also been improved.
See more...Un-hooked riders will feel at home on the Reo, it will fly and float in unison with your movements. Simply trim in with the cleat before unhooking, or if you prefer to ride un-hooked often we suggest adjusting the Control Systems back leader lines to the longer position. To customise bar pressure and turning speed for your personal preference use the rear line adjustment tabs on the kite.
FEATURES
1/15
this is your go-to surf performance kite
Wave riding specific design
Improved low end and wider performance range
Transverse sail shaping for cleaner and tighter canopy
Super direct with improved response and range before luffing
Instant power, faster handling, huge de-power and insane drift
2/15
WHAT’S NEW ON THE V7?
New refined design and sail control
Transverse sail shaping results in a cleaner aerofoil for increased performance
Reduced drag and more drive through the window
Smoother handling in gusty conditions
Improved low end
Thinner bridles than on V6 for reduced parasitic drag and weight
Being more ruggedly built than the Ultra-X version, the meatier material on the V7 is better suited to riders who may regularly rig up and launch / land on more abrasive beaches.
3/15
Easy Relaunch
Re-launch is quick and easy – by turning the bar or using the Re-launch Balls on the leader lines, the Reo will roll over and take off from the water in an instant. This is especially helpful if you’re stuck in the impact zone and need to get out of there fast!
4/15
Transverse Sail Shaping
The Leading Edge features Transverse Sail Shaping creating a cleaner surface on the most important area of the aerofoil. The result is less turbulent airflow and longer skin adhesion, which positively effects the lift to drag ratio increasing overall performance.
5/15
4-line Pulley-less System
NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.
6/15
Internal reinforcements
What’s on the inside counts too – internal reinforcements for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.
7/15
Load Distribution Panels
Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.
8/15
Direct Connect Struts
Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. Struts are connected directly to the Leading Edge with internal and external reinforcements. This unique construction method ensures clean profiles are maintained with the optimum canopy tension.
9/15
Reinforced Leading Edge and Struts
There are two HyperFlow Inflation valves, one on the LE and one on the strut, with an interlinking valve and hose. This enables you to inflate the strut to a higher pressure than the leading edge. The connecting hose allows rapid single-point inflation and deflation.
10/15
Reinforced Trailing Edge
Double layer Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.
11/15
Anti-Snag line deflectors
The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.
12/15
Fast Flow One-Pump Inflation System
The Fast Flow One-Pump Inflation System makes set up and packing quick and easy. It features single point inflation/deflation and a high air flow rate between the Struts and Leading Edge, with clips to seal the hoses to prevent unwanted air flow in case of damage.
13/15
Anti-Flap Soft Battens
Soft Battens strategically positioned along the Trailing Edge provide canopy support and reduce flutter, enhancing kite feedback to the rider and also reducing canopy material wear.
14/15
Back-line trimming options
Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.
Recommended for an average-sized kiter riding a surfboard with intermediate to advanced skills. Lighter rider/beginner? Take 5 knots off the high end of the range Foiling? Drop a few sizes to suit the conditions
Buy OZONE REO V7 at BILLYKITE.BE, Your Online KITE, TWINTIP, HARNESS, APPAREL & ACCESSORIES Shop
Thanks for contacting us. We'll get back to you as soon as possible.
Continue shopping
This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam
sollicitudin leo sapien, quis tristique arcu ultrices fringilla.
Integer scelerisque sem et risus venenatis, at luctus urna
sagittis.